GCQuad - Adjusting hardware Barometer (Air Pressure) / Sea Level

GCQuad - Adjusting hardware Barometer (Air Pressure) / Sea Level

To adjust the GCQuad Barometer, follow the steps below.

1. Tap "OK" To access the main menu
2. Use the up/down arrow keys to select "SETTINGS"
3. Use the up/down arrow keys to hover over the "AIR PRESSURE"
4. Then tap "OK" to change the air pressure
- AUTO
- SEA LEVEL
- 2500 FT
- 5000 FT
- 10000 FT

    • Related Articles

    • GCQuad - The basics

      Core Technology Quadrascopic Imaging: Uses four high-speed cameras to capture ball and club data from multiple angles. Direct Measurement: Unlike some monitors that estimate data, GCQuad measures actual impact parameters. Data Captured Ball Data: ...

    • GCQuad not picking up shots

      If your GCQuad is not collecting shot data (ball & club) 1. Clean camera lenses (compressed air, lens wipes, microfiber cloth). 2. Test the Launch Monitor standalone (disconnected from computer or mobile device) 3. Try different environments and send ...

    • GCQuad "Registration Expired" message

      The GCQuad must connect to the internet every 45 days to stay validated. If it doesn’t, you’ll see a “Registration Expired” message. It will still work standalone, but won’t connect to software or apps until validation is completed. What Happens if ...

    • Device not connecting

      If your GCQuad is not visible in the Device settings, please check the following: 1. Have you tested all connection types? (Ethernet/USB-C/Wifi) 2. Have you tested different cables? 3. Have you tried unplugging and plugging the cable back on each ...

    • How to Register and Validate Your Device (GCQuad, QuadMAX, GC3, GC3s)

      What Happens if Validation Expires If your device goes past 45 days without validating: Wireless connectivity to software (WiFi / Bluetooth) will be disabled Club data will be limited to 1-dot mode only Features recently purchased (like Club Mode) or ...