GC3
Using the GC3 alignment stick
Using Alignment Stick To activate target alignment, swipe down to access the Quick Settings page. Select SETTINGS, then go to TARGET ALIGNMENT USING THE ALIGNMENT STICK Target alignment can be adjusted up to 10 degrees on the GC3 via the FSS ...
GC3 Won’t Turn On After Charging?
Troubleshooting Steps to Try First Before assuming the worst, it’s important to rule out simple causes. Start by testing the charger and power source: Try a different power outlet – Even if the outlet appears functional, some may not deliver ...
Missed Shots Still Capture Valuable Data
Can Missed Shots Be Saved? What Data Is Actually Captured? Yes—missed shots can be saved, and the data from them is valuable, even if it’s not immediately visible on screen. The key is understanding that the GC3 saves video footage and sensor data ...
Why Is My Device Missing Shots?
If your Foresight Sports device appears to “miss shots,” this is often caused by hitting mat setup or usage, rather than a device fault. Below are steps to identify and correct the issue. Step 1: Check Mat Placement Ensure the hitting mat is firmly ...
GC3 battery recalibration
When to Recalibrate - Battery stuck at 0% even after charging - Battery jumps quickly to 100% - Fast discharge - Voltage and charge level mismatch (e.g., 100% at 7V) Requirements GC3 must be running firmware PLM FW V1.14.4.91 or later Battery voltage ...
My GC3 is not charging
Confirm Power Source: Make sure the power cable is securely connected to both the GC3 and the wall outlet. Try a different outlet or power cable if available. Try recalibrating your battery.
GC3 Serial number
The GC3 Serial number should be at the bottom of your GC3 on a small sticker, near the QR code.
GC3 not connecting
If your GC3 is not visible in the Device settings, please check the following: 1. Have you tested all connection types? (Ethernet/USB-C/Wifi) 2. Have you tested different cables? 3. Have you tried unplugging and plugging the cable back on each end? ...
How do I register my GC3?
To register your GC3, please refer to the GC3 User Manual: https://support.foresightsports.com/gc3-user-manual#section-3211Make sure your GC3 is connected to the internet before you start the process. General GC3 Network connection guide: ...
GC3 Firmware version check & update
On your GC3 display, swipe down to access the Quick Settings page. Then select "Settings" Firmware > This page will show your current Firmware version. To see if it needs updating, please connect your GC3 to the Wifi network. General GC3 Network ...
How do I register my GC3?
To register your GC3 please refer to the GC3 User Manual: https://support.foresightsports.com/gc3-user-manual#section-3211 Make sure your GC3 is connected to the internet before you start the process. General GC3 Network connection guide: ...
Popular Articles
Transfer of ownership
Ownership Transfer (UKI, EMEA & South Africa) No cost to transfer ownership in these regions. For others, contact your local distributor for region unlock and fees. Fastest Method: The seller can log into their FSX Live account online ...
GCQuad "Registration Expired" message
The GCQuad must connect to the internet every 45 days to stay validated. If it doesn’t, you’ll see a “Registration Expired” message. It will still work standalone, but won’t connect to software or apps until validation is completed. What Happens if ...
Can I use my device in a different country?
1. Region Locking & Validation Your device is region-locked, meaning it’s tied to specific countries or areas. It needs to be connected to the internet every 45 days to ping the main server as a built-in security measure. If you travel outside the ...
Range Ball Data vs Premium Golf Ball Data
When using the GCQuad or GC3/GC3S outdoors, it is important to note the difference in data of a range ball vs a premium golf ball. Below is a data set from Todaysgolfer.co.uk, which shows the results of their in-house pro testing range balls vs ...
Windows activation
If you're seeing a message that Windows isn’t activated, try these steps: 1. Go to Windows Settings > System > Activation to check the activation status. 2. Make sure you're connected to the internet. 3. If you have a product key, click "Change ...