Devices are registered to the regions where they were purchased. You can check your assigned regions:
GCQuad: Press OK on the Quad > ABOUT > Screen 2
If you are using the device outside of these territories, it will lock as a security measure.
It can potentially also lock if you are using a VPN, as this would set a location outside of the device's territories, which could also lock the device.
Please change your VPN to a local network to unlock it, connect the Quad in your software Device settings or plug it directly into your router via ethernet cable, keep it connected for 15 minutes, then restart the device.
GC3: Make sure VPN is not enabled on your router or computer, or change it to a local network, then connect the GC3 to your Wifi.
Related Articles
Can I use my device in a different country?
1. Region Locking & Validation Your device is region-locked, meaning it’s tied to specific countries or areas. It needs to be connected to the internet every 45 days to ping the main server as a built-in security measure. If you travel outside the ...
Device not connecting
If your GCQuad is not visible in the Device settings, please check the following: 1. Have you tested all connection types? (Ethernet/USB-C/Wifi) 2. Have you tested different cables? 3. Have you tried unplugging and plugging the cable back on each ...
Can I send my device for repair?
To request a repair, please send an email to support@foresightsports.eu with the following details: Device Type: Device Serial number: Fault: Steps tried: Contact name and phone number: Thank you!
Why Is My Device Missing Shots?
If your Foresight Sports device appears to “miss shots,” this is often caused by hitting mat setup or usage, rather than a device fault. Below are steps to identify and correct the issue. Step 1: Check Mat Placement Ensure the hitting mat is firmly ...
Why Is My Overhead Device Missing Shots?
If your Foresight Sports device appears to “miss shots,” this is often caused by hitting mat setup or usage, rather than a device fault. Below are steps to identify and correct the issue. Step 1: Check Mat Placement Ensure the hitting mat is firmly ...