No image is showing on the projector

No image is showing on the projector

If your projector isn’t showing an image after turning on your PC, try these steps:

1. Check the cable connection between the PC and the projector. Unplug, reconnect on both ends.
2. Make sure the projector’s HDMI is plugged into the graphics card, not the motherboard.
The graphics card usually has a HDMI port and Display ports at the lower end of your PC in a row.
3. If you're using an additional monitor, turn it on - this can affect where the image appears.
4. On your PC, press Windows + P and select Duplicate or Extend.
5. Select the correct input/source on the projector (e.g., HDMI 1).
6. Restart both the PC and the projector.
7. Test with another laptop or computer, if possible or try a different HDMI cable.
8. Does the projector show a black screen or a blue screen with "No signal"?
If the issue still exists, please send an email to support@foresightsports.eu

    • Related Articles

    • Fix Projector Aspect Ratio for Impact Screens

      Fixing Projector Aspect Ratio Issues on Impact Screens If your projector image doesn’t fill the screen and shows black bars at the top and bottom, the issue is usually a mismatch between the projector’s aspect ratio and the Windows display resolution ...

    • Touchscreen doesn't turn on

      If your touchscreen isn’t turning on, please try the following: 1. Check power – make sure the screen is plugged in and powered on. If the LED light is on (green/orange) the monitor has power. 2. Check the HDMI cable – ensure it’s securely connected ...

    • Damaged launch monitor

      If you accidentally damaged your launch monitor, please send a few pictures of the damage to support@foresightsports.eu. We will then review the images within 1-2 working days and arrange a collection.

    • Touchscreen is not reacting to touch

      If your touchscreen isn’t responding to touch, please try the following: 1. Check the USB cable – touch functionality requires a USB connection in addition to HDMI. There should be 3 cables coming out of your touchscreen monitor: USB, HDMI and power. ...

    • How to save launch monitor logfiles

      Device logs contain diagnostic data that help Support identify communication, calibration, and performance issues. Whether you’re submitting a ticket or responding to a Support request, follow the steps below to collect and share your launch ...